SEAGATE Scorpion STD24000N 50 Pin SCSI | Internal Tape Drive | P/N 70101905-001

Item is used, but tested to power on and be recognized by an Operating System -- see pictures. Item comes **AS PICTURED** and does NOT include: Original Box or Packaging Software CDs or Driver Discs Documentation / Paperwork Tape(s) Cable(s) SCSI Controller Card(s) Any Type of Follow-Up Support This Tape Drive Model No -> STD24000N P/N -> 70101905-001 SBU No -> 10002775-001 Serial Number -> GC06C72 Date Code (?) -> JP081808 Made In -> Japan These DAT Drives support connection to a standard, single-ended SCSI or SCSI-2 interface. A 50-conductor flat cable or a 25-signal twisted-pair cable may be used to connect the drive to its SCSI host adapter. The cable should not be longer than 6 meters [ 19.5 feet ]. The internal DAT drive provides a 50-pin right-angle, dual-row single-ended SCSI connector attached to the main PCB at the back of the drive. The default dip switch settings for this drive are: SCSI ID 0 The Drive Reads or Writes Both MRS & non-MRS 4-mm Media Parity Checking is DISABLED DDS-DC Data Compression is Enabled Seagate Inquiry String is ENABLED Power-On Self-Test Diagnostics are DISABLED MORE INFO AVAILABLE IF NEEDED E4487